HOM Segreto, Installation Instruction

Page: 14 / 16

14
INSTRUCTION FOR USE
BEFORE USING THE PRODUCT
 Please read these instructions carefully before beginning
installation to ensure the appliance is installed safety and
correctly.

Installation should be performed by qualified professional
only. Local installation standards should be applied.

Before any operation remove the packaging and check
appliance integrity. If any defect or damage are noticed do
not install or try to repair the appliance but inform the
retailer.
The packaging should be kept out of reach of children and
disposed in accordance whit the national regulations for
waste processing.

Do not modify or disassemble the appliance. Do not remove
the ceramic heater. It may cause fire, electric shock or
injury.

This appliance is designed and produced for home use only
and is not suitable for installing and using in public places
or on vehicles, boats or aircraft.
FOR YOUR SAFETY

Electrical wiring work should be done by a certified
professional in conformance with local standards.
 Be sure to install a ground-fault circuit interrupter idn < 30
mA.
 This is a CLASS 2 electric insulation appliance and therefore
does not require an earth connection.
 If a product with Schuko plug is installed in France, connect it
to the main power supply by cutting off the plug and
adopting a suitable connection box.

The electrical connection to the main power supply must also
include a 2-pole switch with a minimum contact aperture of 3
mm.

If the electric cable or the plug are damaged and has to be
repaired do not perform this repair by yourself. Bring the
product to a qualified repair centre and have them repaired
by specialised personnel in order to avoid any risk of
damage.
 Never use the product in rooms that are saturated with
explosive gas, vapours generated by solvents or paints or any
other flammable vapours or gas.
 This appliance is not intended for use by young people or by
persons who possess limited physical, sensorial or mental
capabilities unless they are adequately supervised by a
responsible person to ensure that they can use the appliance
safely. Young children should be supervised to ensure that
they do not play with the appliance.
 Never allows animals or children to play with or touch the
appliance.

Attention this appliance is intended only for drying textiles
washed in water.

SAFE POSITIONING

Never install the appliance on a surface made of wood or
synthetic material.

Do not climb on the appliance.

Never place this appliance immediately underneath a power
socket.

Always make observe the minimum distances from wall,
furniture or other objects as showed (fig. A).

The appliance has a grade IPX1 water protection. The
product may be used in bathrooms or humid places as long
as the safety zones are respected. In any cases avoid
installing the appliance in location where there is a lot of
condensation.

It must never be possible for person in the bath tub or
shower to reach the power switch.
INSTALLATION

Expansion plugs and screws, provided with the product, are
only suitable for concrete or solid brick walls. For different
wall material types, use the appropriate fixing means.
ELECTRICAL CONNECTIONS
 The product must be powered at a voltage of 230 Vac, 50
Hz.

The product is supplied with a ceramic connector which is
accessible by removing the down panel (Fig. 2b).
USE OF THE PRODUCT
 By means of the illuminated switch the towel warmer can be
switched on and off.
 Carefully arrange the towels without overlapping them in
order to optimise drying time and appliance temperature.
CLEANING
 Avoid using acid-based product. Do not use products
containing sodium hypochlorite, chlorine-based
detergents, or those containing bleach or aggressive
solvents that are not suitable for the cleaning of wood
surfaces. Do not use abrasive sponges.