The product must be powered at a
voltage of 230 Vac, 50 Hz.
The product is supplied, depending
on type, with a Schuko plug cable to
connect to a proper socket, or with a 3
core cable for a permanent installation
to the main power supply (Brown = Live,
Blue = Neutral, Green/Yellow = Earth
8
The product may be used in bathrooms
or humid places as long as the safety
zones are respected. In any cases avoid
installing the appliance in location
where there is a lot of condensation.
It must never be possible for person in
the bath tub or shower to reach the
power switch.
INSTALLATION
ELECTRICAL
CONNECTIONS
By means of the illuminated switch the
radiator can be switched on and off.
Avoid using acid-based product on
painted metallic parts. Do not use
products containing sodium hypochlorite,
chlorinebased detergents, or those
containing bleach or aggressive solvents
that are not suitable for the cleaning of
painted surfaces. Do not use abrasive
sponges.
CLEANING
INSTRUCTION FOR USE
Expansion plugs and screws, provided
with the product, are only suitable for
concrete or solid brick walls. For different
wall material types, use the appropriate
fixing means.
In the event of overheating, the safety
internal device automatically detaches
the ceramic heater element. The radiator
will start again to operate as soon as the
temperature returns below the safety
threshold.
If malfunction operating is
noted or the damaging of the
panel appear, disconnect the
radiator from the main supply
and contact the dealer.
MALFUNCTION EVENT
USE OF THE PRODUCT
ENVIRONMENT AND RECYCLING
Please help us to protect the environment by
disposing the packaging in accordance with the
national regulations for waste.
Recycling of obsolete appliances
Appliances with this label must not be disposed of in
general waste. The disposal of use equipment must
be performed in conformity with to local regulations.
