6
Please read these instructions carefully
before beginninginstallation to ensure
the appliance is installed safety and
correctly.
Installation should be performed
by qualified professional only. Local
installation standards should be applied.
Before any operation remove the
packaging and check appliance
integrity. If any defect or damage are
noticed do not install or try to repair the
appliance but inform the retailer. The
packaging should be kept out of reach
of children and disposed in accordance
whit the national regulations for waste
processing.
Do not modify or disassemble the
appliance. Do not remove the ceramic
heater. It may cause fire, electric shock
or injury.
This appliance is designed and produced
for home use only and is not suitable for
installing and using in public places or on
vehicles, boats or aircraft.
BEFORE USING
THE PRODUCT
Use a single-phase alternating current 230
V, 50 Hz power supply. Voltage in excess
of 230 V +10 % may cause malfunction, so
stay within the rated range.
Electrical wiring work should be done by
a certified professional in conformance
with local standards.
Be sure to install a ground-fault circuit
interrupter.
This is a CLASS I electric insulation
appliance and must be properly
grounded.
If the electric cable or the plug are
damaged and has to be repaired do
not perform this repair by yourself. Bring
the product to a qualified repair centre
and have them repaired by specialised
personnel in order to avoid any risk of
damage.
FOR YOUR SAFETY
Never use the product in rooms that are
saturated with explosive gas, vapours
generated by solvents or paints or any
other flammable vapours or gas.
This appliance is not intended for use
by young people or by persons who
possess limited physical, sensorial or
mental capabilities unless they are
adequately supervised by a responsible
person to ensure that they can use the
appliance safely. Young children should
be supervised to ensure that they do not
play with the appliance.
Never allows animals or children to play
with or touch the appliance.
Attention! When turned on, the panel
may become very hot (about 80 °C).
Attention this appliance is intended only
for drying textiles washed in water.
Never leave your home while the
appliance is turned on; make sure the
illuminated switch is OFF and the red
light is off.
Never install the appliance on a surface
made of wood or synthetic material.
Do not climb on the appliance.
Never place this appliance immediately
underneath a power socket.
Always make observe the minimum
distances from wall, furniture or other
objects as showed (fig. A).
The appliance has a grade IPX4 water
protection. The product may be used in
bathrooms or humid places as long as
the safety zones are respected. In any
cases avoid installing the appliance
in location where there is a lot of
condensation.
It must never be possible for person in
the bath tub or shower to reach the
power switch.
SAFE POSITIONING
INSTRUCTION FOR USE