Operation of the Panel saw
FKS 315-1500 E | Version 1.07
11
Working position
Fig. 16: Working position
Working positions on the sliding table saw:
A: Working with the sliding table
B: Working on the saw table
Workpiece downholder
Fig. 17: Workpiece downholder
Before the sawing process, place the workpiece hold-
down in a suitable position to the workpiece to prevent
the workpiece from striking back during sawing (kickback
protection).
ON-OFF switch
Fig. 18: ON-OFF switch (B)
To start the machine, press the green START button.
Select suitable saw blade
Fig. 19: Number of teeth of a suitable saw blade: A
For a safe operation:
- Check that the machine is well secured and does
not vibrate.
- Never take the workpiece back after cutting starts.
- Work at the proper and consistent feed rate, never
stopping the workpiece during the cut.
- Only work with a sharp saw blade.
- Select suitable saw blade: At least 2 - 3 teeth
should always cut the workpiece at the same time
(A, Fig. 19).
8.1 Sawing with the sliding table
Fig. 20: Sawing operation with sliding table
Step 1: Place the workpiece on the sliding table and fix it
to stop B and kickback guard C.
Step 2: Turn on the suction device and the saw.
Step 3: From working position A push the sliding carriage
in the direction of the saw blade.