Introduction
KSO 790 | Version 3.02
3
1
Introduction
You have made a good choice by purchasing the Edge
milling machine made by HOLZSTAR.
Thoroughly read the operating instructions before
commissioning the machine.
It informs you about the proper commissioning, the in-
tended use as well as the safe and efficient operation
and maintenance of the Edge milling machine.
The operating instructions are part of the Belt & spindle
sanding machine. Always keep it at the place of use of
the Edge milling machine. Furthermore, the local acci-
dent prevention regulations and the general safety notes
are applicable for the field of application of the Edge mil-
ling machine.
The illustrations in these operating instructions serve the
general comprehension and may deviate from the actual
type.
1.1 Copyright
The contents of these instructions are copyright. Their
application is admissible in the frame of the device. An
application beyond the described application is not allo-
wed without written approval of the manufacturer.For the
protection of our products, we shall register trademark,
patent and design rights, as this is possible in individual
cases. We strongly oppose any infringement of our intel-
lectual property.
1.2 Customer service
Please contact your dealer if you have questions on the
machine or if you need technical advice. They will help
you with specialist information and expert advice.
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax:
+49 (0) 951 96 555 - 55
E-Mail: [email protected]
Internet: www.holzstar.de
Spare part orders:
Fax: 0951
96555-119
E-Mail: [email protected]
We are always interested in valuable experience and
knowledge gained from using the application, which then
could be shared and be valuable to develop our products
even further.
1.3 Limitation of liability
All information and notes in these operating instructions
were summarised taking the applicable standards and
rules, the state-of-the-art and our long-term knowledge
and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of the operating instructions,
- Inappropriate use
- Use of untrained staff,
- Unauthorised modifications
- Technical changes,
- Use of not allowed spare parts.
The actual scope of delivery may deviate from the expla-
nations and presentations described here in case of spe-
cial models, when using additional ordering options or
due to latest technical modifications.
The obligations agreed in the delivery contract, the gen-
eral terms and conditions as well as the delivery conditi-
ons of the manufacturer and the legal regulations at the
time of the conclusion of the contract are applicable.
2
Safety
This paragraph will give you an overview of all important
safety packages for the protection of the people using it
well as for a safe and undisturbed operation. Other task-
based safety notes are included in the individual chapters.
2.1 Symbol explanation
Safety instructions
The safety notes in these operating instructions are high-
lighted by symbols. The safety notes are introduced by
signal words which express the concern of the risk.
DANGER!
This combination of symbol and signal words indi-cates
an imminently dangerous situation which may lead to
death or severe injuries if they are not avoi-ded.
WARNING!
This combination of symbol and signal word indicates
a potentially dangerous situation that can lead to
death or serious injury if not avoided.