Holzmann DF 1200N, User Manual

Page: 24 / 42

HOLZMANN Maschinen Austria  www.holzmann-maschinen.at Seite 24
Bedienungsanleitung DF 1200N
cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The
smaller the gauge number, the heavier the cord.
15. SECURE THE WORKPIECE. Use clamps or a vise to hold the workpiece when practical.
Loss of control of a workpiece can cause injury.
16. FEED THE WORKPIECE AGAINST THE DIRECTION OF THE ROTATION OF THE BLADE,
CUTTER, OR ABRASIVE SURFACE. Feeding it from the other direction will cause the workpiece
to be thrown out at high speed.
17. DON’T FORCE THE WORKPIECE ON THE MACHINE. Damage to the machine and/or injury
may result.
18. DON’T OVERREACH. Loss of balance can make you fall into a working machine, causing
injury.
19. NEVER STAND ON THE MACHINE. Injury could occur if the tool tips, or if you accidentally
contact the cutting tool.
20. NEVER LEAVE THE MACHINE RUNNING UNATTENDED. TURN THE POWER OFF. Don’t
leave the machine until it comes to a complete stop. A child or visitor could be injured.
21. TURN THE MACHINE “OFF”, AND DISCONNECT THE MACHINE FROM THE POWER SOURCE
before installing or removing accessories, before adjusting or changing set-ups, or when
making repairs. An accidental start-up can cause injury.
22. MAKE YOUR WORKSHOP CHILDPROOF WITH PADLOCKS, MASTER SWITCHES, OR BY
REMOV-ING STARTER KEYS. The accidental start-up of a machine by a child or visitor could
cause injury.
23. STAY ALERT, WATCH WHAT YOU ARE DOING, AND USE COMMON SENSE. DO NOT USE
THE MACHINE WHEN YOU ARE TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL, OR
MEDICA-TION. A moment of inattention while operating power tools may result in injury.
24. TAKE PRECAUTIONS AGAINST DUST INHALATION. The dust generated by certain woods
and wood products can be injurious to your health. Always operate machinery in well-
ventilated areas, and provide for proper dust removal. Use wood dust collection systems
whenever possible.
1.2 Additional
1. DO NOT OPERATE THIS MACHINE UNTIL it is assembled and installed according to the in-
structions.
2. OBTAIN ADVICE from your supervisor, instructor, or another qualified person if you are not
familiar with the operation of this machine.
3. FOLLOW ALL WIRING CODES and recommended electrical connections.
4. ROUGH CUT THE WORKPIECE as close as possible to the finished shape before installing it
on the faceplate.
5. EXAMINE THE WORKPIECE FOR FLAWS and test glue joints before mounting the workpiece
on machine. DO NOT mount a split workpiece or one containing a knot.
6. SECURELY FASTEN THE WORKPIECE to the faceplate prior to faceplate turning. Use the
appropriate size faceplate to properly support the workpiece. Do not let the screw fasteners
interfere with the turning tool at the finished dimension of the workpiece.
7. NEVER DRIVE THE WORKPIECE into the drive center while the drive center is in the head-
stock. Set the drive center into the workpiece with a soft mallet prior to installing it on the
headstock.
8. SNUG THE TAILSTOCK CENTER against the workpiece and lock it. Lubricate the tailstock
center if it is not a ball bearing center.
9. PROPERLY ADJUST THE TOOL REST HEIGHT.
10. ADJUST THE TOOL REST so it is as close to the workpiece as possible.
11. TIGHTEN ALL CLAMP LOCKING HANDLES before operating.
12. ROTATE THE WORKPIECE BY HAND to check clearance before turning the machine “ON”.