ASSEMBLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
30
WT39
2.
Table legs – left side
8 x AA
Bolts
8 x CC
Washers
8 x BB
Nuts
•
Align holes in cross bracing (3R) and (4R) to table
legs (1R) and (2R)
•
Insert bolts (AA x 8) through matching holes as
shown – four bolts per cross bracing
•
Fasten with washers (CC x 8) and nuts (BB x 8)
NOTICE:
Do not over tighten!
3.
Base of table – cross member
16 x AA
Bolts
16 x CC
Washers
16 x BB
Nuts
•
Align holes in cross bracing pieces (5 and 8) to the
complete table leg ends from previous steps
•
Ensure labels on pieces (5 and 8) have arrows
facing up and square holes are on the top
•
Insert bolts (AA x 2) through left and right side of
lower front cross bracing
•
Fasten with washers (CC x 2) and nuts (BB x 2)
•
Repeat for lower back cross bracing (8)
•
Repeat steps for top cross bracing pieces (6 and7)
•
Ensure labels on pieces (6 and 7) have arrows
facing up and round holes are on top
NOTICE:
Do not over tighten!