TRANSPORT
14
WB138C
TRANSPORT
For proper transport, observe the instructions and information on the transport packaging
regarding centre of gravity, attachement points, weight, means of transport to be used and
prescribed transport position, etc.
Pay attention to the correct body posture when lifting, carrying and setting down the load.
Lifting / Setting down
When lifting/setting down, ensure that you are standing firmly (legs hip-width apart).
Lift/set down load with knees bent and back straight.
Do not lift/set down load with a jerk.
Carrying
Carry load with both hands as close to body as possible.
Carry load with straight back.
Always secure the assembled product in the transport position when transporting it to prevent
damage to the product.
ASSEMBLY
12.1
Check delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage must
also be noted immediately on the delivery note in accordance with the provisions of the warranty,
otherwise the goods are deemed to have been properly accepted.
12.2
Requirements for the installation site
Place the product on a level, solid surface. Observe the safety requirements and the dimensions of
the product. The chosen installation site must comply with the local safety regulations and meet
the ergonomic requirements for a workplace with sufficient lighting conditions.
12.3
Assemble
Assemble the workbench as described below:
1.
Place the connecting nut of the screw (16) into the
opening of the frame brace (1).
Make sure that the slot of the connecting nut is
aligned horizontally.
Fix the two framesides (2, 3) and the frame brace (1)
with the two screws (16).
Make sure that the groove of the frame brace is on
the inside.
