OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
17
WST20
OPERATION
14.1
Operating instructions
C A U T I O N
Do not use product if you notice a malfunction or damage!
Check the following points daily or before each use of the product:
•
Make sure all screws and bolts are tightened.
•
Make sure that all locks are fixed.
•
Always place the
product
on a level, vibration-free, non-slip surface.
Do not use the product, if you notice any malfunction or damage!
14.2
Operation
W A R N I N G
Do not use the
product
on ramps and inclines!
14.2.1
Levelling the machine
Before starting work, the base frame with
the mounted machine must be levelled
1.
Loosen the nut (7)
2.
Bring the base frame into the correct
position by turning the feet (6)
3.
Tighten the nut again
14.2.2
Folding up
1.
Pull the locking lever (4) upwards
2.
Fold up the base frame
