HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Strana 22
ELEKTRICKÁ ZAKRUŽOVAČKA PLECHU / ELECTRICAL ROUND BENDING MACHINE RBM 1020E
12
ASSEMBLY
12.1
Preparatory activities
12.1.1
Delivery content
After receipt of the delivery, if all parts are in order. Report any damage or missing items
immediately to your dealer or the shipping company. Visible damage must also be recorded
without delay in accordance with the provisions of the warranty on the delivery note, otherwise
the goods shall be accepted as properly.
12.1.2
The workplace
Choose a suitable place for the machine;
Observe the safety requirements of Chapter
11
as well as the dimensions of the machine from
Section
4.2
The location selected must ensure as well as the possibility for connection to an extraction system
an appropriate connection to the electrical grid.
Make sure that the floor can support the load of the machine; the machine must be leveled on all
bases simultaneously, so it is perfectly level and stable.
You must also ensure all round a distance of at least
0.8
m around the machine.
12.1.3
Transport / unloading the machine
The machine itself is delivered pre-assembled. It must only be mounted miter fence, and other
controls on the machine.
W A R N I N G
The lifting and transportation of the machine must only be carried out by qualified
personnel and must be performed with appropriate equipment
Note that any lifting equipment used (crane, forklift, sling, etc.) must be in perfect condition.
To maneuver the machine in the box the pallet truck or a forklift can be used.
12.1.4
Preparing of surfaces
Eliminate the preservative is applied for corrosion protection of the parts without paint. This can
be done with the usual solvents. In this case, no nitro solvent or similar means, and in no case
use water.
N O T E
The use of paint thinners, gasoline, harsh chemicals or abrasive cleaners leads to
damage to the surface!
Therfore:
When cleaning, use only mild detergent.
Summary of Contents for RBM 1020E
Page 36: ......