OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
23
MABS 1500
13
OPERATION
Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating
the device.
13.1
Operation instructions
W A R N I N G
Perform all machine settings with the machine being
disconnected from the power supply!
N O T I C E
Place the machine next to the metalworking machine in a way that it
will not interfere with your work!
Start to work with the metalworking machine only until the dust
collector has reached full speed!
13.2
Connection of dust collector to machine
Dust collector plug MABS 750: Ø 100mm
Ensure dust collector tubes to be composed of hardly inflammable material and antistatic.
The total distance between dust collector hood and machine dust collector hood shall not exceed
10 meters.
13.3
On / Off
On-off-switch:
Press green button (I): turn on
Press red button (0): turn off
Summary of Contents for MABS 750
Page 54: ......
