MAINTENANCE
HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
Seite 36
Zug-, Kapp-, Gehrungssäge / Profi mitre saw / Manual de instrucciones/Mode d´emploi KAP 255 XJL
Disadvantage: You MUST fix workpiece additionaly with downholder (19) to prevent it from
kickback.
13.3.3
Slot cuts
Clap the depth stop (27) to the side so that the adjustment screw touches the depth stop
(27) when swinging down the saw arm.
Adjust the adjustment screw for slut cuts as desired.
13.4
OPERATION NOTICES
Always use well sharpened saw blades. Deflected, cracked or worn saw blades are a security
risk and have to be replaced immediately!
Assure yourself that you do not overload the machine. Use it for operations it is designed
for.
Choose always saw blades where at least 2-3 teeth are simultaneously in the material to
achieve a clean cut and to reduce the risk of material kickback.
For precision miter and bevele cuts you should use a saw blade with at least 60 teeth.
14
MAINTENANCE
A C H T U N G
Don’t clean or do maintenance on the machine while connected to the power supply:
Damages to machine and injuries might occur due to unintended switching on of the
machine!
Therefore: Switch the machine off and disconnect it from the power supply before
any maintenance works or cleaning is carried out!
Malfunctions must be repaired immediately by trained persons.
14.1
Maintenance schedule
Checks and activities to be performed
Loose or lost screws
Prior to every operation
Damage of any part
Prior to every operation
Saw blade condition
Prior to every operation
Clean machine
After every operation
Empty dust bag
After every operation
Readjust miter and bevel angle, laser;
monthly
Sharpen saw blade
When necessary
Change saw blade
When worn or defect
Change carbon brush
When carbon brush is worn ( < 4mm )
Summary of Contents for KAP 255XJL
Page 72: ......
