MAINTENANCE
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Seite 55
5-fach Kombination / combined 5-operation machine K5 315VF-2000
15
MAINTENANCE
A T T E N T I O N
Don’t clean or do maintenance on the machine while it is still connected to the power
supply:
Damages to machine and injuries might occur due to unintended switching on of the
machine!
Therefore: Switch the machine off and disconnect it from the power supply before any
maintenance works or cleaning is carried out
The machine is low maintenance and contains little parts that must undergo a maintenance oper-
ator.
Faults or defects that may affect the safety of the machine, must be rectified immediately.
Repair work may only be performed by qualified personnel!
The complete and utter cleaning ensures a long life for the machine and represents a safety re-
quirement.
After each shift the machine and all its parts must be thoroughly cleaned by the dust and swarf
sucked through the suction system and all other waste is disposed of by compressed air.
Check regularly that all warning and safety instructions on the machine and available in a perfect-
ly legible condition.
Check before every use the perfect condition of the safety devices.
For storage of this machine may not be stored in a humid room and must be protected from the
influence of weather conditions.
The elimination of defects does your dealer
Repair work may only be performed by qualified personnel!
15.1
Switch blade / Scoring blade change see 13.4.1
15.1.1
Change diameter of the cutter shaft
W A R N I N G
Work on planer and planer knives without protective equipment:
Injuries to the hands by sharp cutting edges!
Therefore:
While working on the planer necessarily gloves
1
pressure spring
1
2
3
4
5
Summary of Contents for K5 315VF-2000
Page 93: ......
