HOLZMANN MASCHINEN HUB 25T, User Manual

Page: 18 / 29

CLEANING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 18
HUB 25T | HUB 25T E
CO
16.2 Operation
Raise:
Move the load lever to the lowest position and perform pumping
movements with the tiller arm.
Lower:
Pull the load lever upwards and hold until the fork frame has
lowered to the desired position. The load lever moves to the initial
position when released.
Optional: with foot pedal (see picture left)
Drive position:
When moving a load, the load lever must be set to the center
position.
Breaking:
To brake, move the hand drawbar against the direction of travel and slow down the lift truck with
muscle power.
Emergency Stop:
 Pull load lever upwards.
=> The load is lowered and slowed down by the ground.
 In addition, brake the pallet truck as described above.
17 CLEANING
W A R N I N G
Cleaning work may only be carried out when the pallet truck is lowered and without
load.
N O T E
Wrong cleaning agents can attack the varnish of the machine. Do not use flammable
liquids or detergents that could damage the machine's paint. Observe the information
and instructions of the cleaning agent manufacturer!
Never use a direct water jet or steam for cleaning! Simply clean the pallet truck with a damp
cloth and dry it carefully (e.g. with compressed air) afterwards.
18 MAINTENANCE
W A R N I N G
Maintenance and repair work may only be carried out with the lift truck lowered and
without load. For various maintenance work, the pallet truck must be jacked up and
secured against rolling away and sinking.