HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Strana 42
PÁSOVÁ PILA / WOOD BANDSAW HBS 230HQ
18.2
Changing the band saw blade
W A R N I N G
Wear gloves when handling with saw blades!
HIGHEST RISK OF CUTTING INJURY!
Before changing the blade, check that the machine is swiched off and
disconet from the power suply
ATTENTION: Take care to install the saw band correctly!
Check the direction of the teething
Unscrew the D-nut and wing screw on the worktable.
Open the upper and the lower cover.
Set the upper saw band guide in the lowest position
Open the cover of upper guide assembly
Loosen the quick release handle
Remove the band saw blade from the machine.
Insert a new bandsaw blade with the
right direction
on the rubber tyres on the band saw wheels.
Then proceed as described in section 8.2.3 and check
the declared adjustment.
Wing screw
Upper Cover
D-nut
Lower Cover
cover of upper guide
Summary of Contents for HBS 230HQ
Page 56: ......
