HOLZMANN MASCHINEN ED1080ADIG, User Manual

Page: 72 / 121

MAINTENANCE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 72
ED1080ADIG
 Before each start-up, make sure that the safety devices are in perfect condition and
function properly.
 Check all connections for tightness at least once a week.
 Regularly check that the warning and safety labels on the machine are in perfect and
legible condition.
 Use only proper and suitable tools.
 Only use original spare parts recommended by the manufacturer.
20.1 Inspection and maintenance plan
The type and degree of machine wear depends to a large extent on the operating conditions. The
following intervals apply when the machine is used within the specified limits:
Interval Component What to do?
Before start of work or
after every maintenance or
servicing
Guideways oiling
Change Gears lubricate lightly with grease
Camlock
Clamping Bolts
Turning Spindle
Adapter
Check fastening
Feed gear
Apron
Head Stock
Visual inspection of the oil levels (via sight
glass)
Weekly
Lead Screw
Feed Shaft
Tailstock
Grease or fill all grease nipples and
lubricators with machine oil.
Top Slide
Cross Slide
Grease or fill all grease nipples and
lubricators with machine oil.
Lathe Slide
Operate pump central lubrication (the
pump is permanently supplied with oil
from apron)
Annually or after every
1000 operating hours
Feed Gear
Apron
Head Stock
Change oil
As needed
Guideways Adjust taper gib
Head Stock Check V-belt and tighten if necessary
Lathe Slide
Adjusting feed clutch (factory setting: 120
N)