OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
37
BS 712TOP; BS712TOP-G
Use the adjustable workpiece fence to cut
workpieces of the same length.
16.5
Adjusting the cutting angle
The cutting angle between vice and saw
blade can be adjusted within the specified
angle range.
Procedure:
Loosen nut (1)
Move the vice jaw to the desired
position (scale 2) and retighten the
nut.
- Tighten the clamping screw after
clamping the workpiece with the vice
jaws (3)
16.6
Adjusting the saw blade speed
BS712TOP
1.
stop machine and wait for standstill
2.
open the V-belt cover
3.
loosen the V-belt tension:
To do this, loosen the motor fixing screws
4 pieces (1). Loosen the belt tension with
tensioning screws (2) and select the
desired saw blade speed by turning the
belts according to the diagram and re-
establisch the V-belt tension.
4.
close the V-belt cover again
BS712TOP-G
Summary of Contents for BS 712TOP
Page 87: ......
