Belltown
40 mm
DE
|
EN
1
Hour
| Stunde
2
Minute
| Minute
3
Second
| Sekunde
4
Stopwatch minutes
| Stoppuhr Minuten
5
Stopwatch seconds
| Stoppuhr Sekunden
6
24-hour hand
| 24-Stundenzeiger
7
Date
| Datum
8
Normal position
| Normalposition
9
1st click
| 1. Position
10
2nd click
| 2. Position
A
Button A
| Taste A |
stop
| Start
B
Button B
| Taste B |
reset
| Zurücksetzen
Setting the time and date
To adjust the date pull the crown out to the first click. Then turn the crown clockwise until
the preview day's date* appears. After this pull out the crown to the second click** when the
second hand is at position 12:00. It will stop on the spot. Then set the hands to the desired
time of the day (make sure AM/PM is set correctly) by turning the crown.
After setting the correct time push the crown back in the normal position.
*Don’t set the date between 21:00 and 01:00 (the date may not change the next day). If it is
necessary to set the date during that time period, firstly change the time to any time outside, set the
date and then reset to the correct time.
**When the crown is at the second click position, do not press any button. Otherwise the chronograph
hands will move.
Stopwatch
This model has an integrated stopwatch that can be started and stopped with button A and
reset with button B. You can also measure a split time by pressing button B during the stop
function (the stopwatch stops = 1st split time, but continues to run in the background).
Pressing button A again will stop the 2nd split time.
Then press button B to display the other split time. When you press button B again, the
measured time is displayed.
You can set the second hand of the stopwatch by pulling the crown out twice until the watch
stops completely. Now you can adjust the hand with the two buttons A and B. The minute
hand is moved back. You can reset the minute hand by resetting the second hand until it is
also at 0.
Accuracy/Month
± 20 sec.
Genauigkeit/Monat
± 20 Sek.
Battery life
2 Years
Batterie Lebensdauer
2 Jahre