Page | 3
Micro OSD V2
Thank you for purchasing the HolyBro Micro OSD V2. This OSD is designed to plug into modern
PixHawk style flight controllers to provide an on screen display that will allow you to monitor key
flight characteristics including battery voltage and flight duration during your FPV flight.
This manual is split into two parts; the first is the most basic ‘plug and play’ setup. The HolyBro Micro
OSD v2 is supplied ready to go so you don’t need to upload any software or files onto it.
The second part of this manual explains how to change setting and OSD layouts if you want to
change the layout and operation to your preferences.
Specifications
ATmega328P with Arduino bootloader
MAX7456 monochrome on-screen display
Solder jumper for PAL video option
Exposed pads for testing
Dimensions: 17.5*35mm
Weight: 3g
Note:
The battery pads are connected to the battery voltage and this is also the same voltage
supplied to the camera in operation. Always check that the camera and connected VTX can support
the full battery voltage.
Warranty and Return Policy
If you believe that your Kakute F7 is defective, please contact us. If we determine that the board is
defective, it will be repaired or replaced at no charge to you. We may ask you to send your Kakute to
our service centre for examination or repair. Shipping costs are your responsibility. Returned items
should include the original packaging and all accessories.
If product is damaged or defective, we will repair or replace it. Refunds are only given when product
is lost by the shipping company. The refund amount is limited to the price of the product. Shipping
costs are never refundable.
Contact us at:
Email: [email protected]
Facebook Page: Holybro
Facebook Group: Holybro Hobby Official Group
