P a g e
|
9
KOPIS 2
4.
Put your arm switch in the position you intend to use as “armed”. You should see the yellow
indicator move as you move the switch. (This won’t work if you haven’t bound your transmitter,
of course.) The common standard is to use “switch pushed away from you” as the neutral
position on a transmitter. By this lo
gic, “switch pulled towards you”
should be armed. My
personal preference is to use “switch pulled towards you” as disarmed, because it’s easier to
slap the switch that direction if you are trying to disarm in a hurry.
5.
With the switch in the “armed” position
, drag the yellow range marker to the end of the channel
where the yellow indicator is.
6.
Click “Save” in the lower
-right of the window. YOUR MOTORS MAY NOW START SPINNING I
SURE HOPE YOU REMOVED YOUR PROPS!
Ports
Click on the “Ports” tab on the left side of the window.