16
Menu
: Select “Point” or “Route”
Enter
: Setting and back to Setting mode
Note:
1.
When the user select the “Point” logging method, the logged distance is the straight line distance
between the starting point and the end point.
2.
If the “Route” logging method is selected , the logged distance will be the accumulated distance
of each segment between the log points. However, because the distance between any two log
points may have error, the accumulated distance value may have increased error with the
increase of the number of the log points.
=========================================================================
Menu
: Go to km/mile mode menu of Setting mode
Enter
: Go to select “km” or “mile”
Note: “km/mile” signifies that the Units of Measure Distance and show speed are “km” or “mile”.
Menu
: Select “km” or “mile”
Enter
: Setting and back to Setting mode
=========================================================================
Menu
: Go to Log record menu of Setting mode
Enter
: Select “Full Stop” or “Overwrite”
Menu
: Select “Full Stop” or “Overwrite”
Enter
: Setting and back to Setting mode
