Rev. 1.71
82
April 11, 2017
Rev. 1.71
83
April 11, 2017
HT66F002/HT66F0025/HT66F003/HT66F004
Cost-Effective A/D Flash MCU with EEPROM
HT66F002/HT66F0025/HT66F003/HT66F004
Cost-Effective A/D Flash MCU with EEPROM
Periodic Type TM – PTM
The Periodic Type TM contains five operating modes, which are Compare Match Output, Timer/
Event Counter, Capture Input, Single Pulse Output and PWM Output modes. The Periodic TM can
also be controlled with two external input pins and can drive two external output pins.
Device
Name
TM Input Pin
TM Output Pin
HT66F003
10-bit PTM
PTCK1, PTP1I
PTP1,PTP1B
HT66F004
10-bit PTM
PTCK0, PTP0I
PTCK1, PTP1I
PTP0,PTP0B
PTP1,PTP1B
Periodic TM Operation
At its core is a 10-bit count-up counter which is driven by a user selectable internal or external clock
source. There are two internal comparators with the names, Comparator A and Comparator P. These
comparators will compare the value in the counter with the CCRA and CCRP registers.
The only way of changing the value of the 10-bit counter using the application program, is to
clear the counter by changing the PTnON bit from low to high. The counter will also be cleared
automatically by a counter overflow or a compare match with one of its associated comparators.
When these conditions occur, a TM interrupt signal will also usually be generated. The Periodic
Type TM can operate in a number of different operational modes, can be driven by different clock
sources including an input pin and can also control the output pin. All operating setup conditions are
selected using relevant internal registers.
Periodic Type TM Block Diagram (n=0 or 1)
