Rev. 1.00
2
December 13, 2018
Rev. 1.00
3
December 13, 2018
Gang-Writer8-8 User’s Guide
Gang-Writer8-8 User’s Guide
1 Overview
1.1 Gang-Writer8-8
The Gang-Writer8-8 main components are the G-ICPM08040 and G-ICPB00040. The G-ICPM08040
which is also known as the programming module, includes 4 programming units, namely
ICP1~ICP4. This is used together with the G-ICPB00040 which is the Base Board. Together they
can implement a powerful means of programming 8 Holtek 8-bit Flash MCUs in parallel to meet the
high efficiency requirements for volume production.
1.2 Main Features
• Supports Holtek 8-bit Flash MCU programming
• Uses the HOPE3000 software
•
Programming files are downloaded to the programing module
•
Supports programming module firmware online one-click quick update
•
Compact size (136×75×23mm) for usage convenience with fixture
• Supports up to 8 sites parallel programming
•
2/4/6/8 sites parallel programming available
•
Supports module extension to achieve up to 12/16 site parallel programming
• Visual programming status display LED indicators
•
Supports offline programming mode
1.3 Hardware Introduction
Programming Module
(G-ICPM08040)
×2
5V USB-Connector
Power Adapter
20PIN (5PIN×4ICP)
PHB Connector×2
Base Board
(G-ICPB00040)
Micro USB Cable
Figure 1. Gang-Writer8-8 Monolithic Components
