TPCB82K680000A Interface Card
13
TPCB82K680000A Interface Card
This interface card is used in conjunction with the
TICE82K680000A.
The card should
be plugged into the CN1 connector of the HT-ICE.
U 2
U 4
U 3
U 5
J P 1
J P 2
V R 1
Y 1
The external clock source has two modes, RC and Crystal. If a crystal clock is to be
used, positions 2 and 3 should be shorted on JP1 and a suitable crystal inserted into
location Y1. Otherwise, if an RC clock is to be used, positions 1 and 2 should be
shorted and the system frequency adjusted using VR1. Refer to the Tools/Mask
Option menu of the HT-IDE3000 User
′
s Guide for the clock source and system
frequency selection.
The U3 connector is used for the 20-pin packages while the U2 connector is used for
the 28-pin packages. The U4 connector supports all pin assignments for the 48-pin
packages, however as it is not fully compatible with the actual 48-pin packages, the
necessary adjustments must be made by the user.
