24
AC POWER DISTRIBUTION
REQUIREMENTS
The Audio Module and any equipment connected to it
(network switches, subwoofer amplifier modules) must
be properly connected to the AC power distribution,
preserving AC line polarity. Every grounding point must
be connected to a single node or common point using
the same cable gauge as the neutral and line cable.
Power Setup and Requirements
In order to ensure the safe operation of the Modul 80-S,
it is critical to understand power distribution, voltage and
current requirements, and electrical safety guidelines.
Power Setup and Requirements
Improper grounding of connections
between Audio Modules and other
equipment may produce noise, hum,
or cause serious damage to the
devices’ electronic components.
When powering the Electronics
Package and the subwoofer
amplifier module from two different
power sources / wall sockets, make
sure that both power sources
provide the same ground potential.
Before applying AC power to any
Audio Module, make sure that
the voltage potential difference
between neutral and earth ground
is less than 5 V.
Ensure the voltage received by
the Audio Module remains within
its 115 - 240 V operating range.
In addition, the ground line must
always be used for safety reasons
and the line-to-ground voltage
should never exceed 240 V.
!
Summary of Contents for MD80-S
Page 1: ...HOLOPLOT X1 Modul 80 S User Manual Version 1 0 en ...
Page 45: ......
