Trident HD Specimen Radiography System User Guide
Chapter 4: User Interface
MAN-05478-002 Revision 003
Page 37
4.3.4 Close a Patient
Select the
Close Patient
button. The system returns to the
Select Patient
screen and
automatically saves to the configured output devices any images that were not sent
previously.
4.3.5 How to Select an Output Group
Select an output device set from the Output Groups drop-down list in the
Procedure
screen.
Note
Images are not sent if an Output Group is not selected.
4.4 How to Access Image Review Features
Select the
Tools
tab in the
Procedure
screen to access the image review features and tools.
on page 46 for information.
4.5 How to Use the Output Groups
The images are sent automatically to the output devices in the selected Output Group
when a patient is closed.
4.5.1 Add or Edit an Output Group
Note
The configuration of Output Groups occurs during installation, but you can edit
existing groups or add new groups.
To add a new Output Group:
1.
Access the
Admin
screen.
2.
Select the
Manage Output Groups
button.
3.
Select the
New
button, enter the information, then select the output device(s).
4.
Select
Add,
then select OK in the
Update Successful
message.
5.
You can select any group to set as the default.
To edit an Output Group:
1.
Access the
Admin
screen.
2.
Select the
Manage Output Groups
button.
3.
Select the
Edit
button, then make the changes.
4.
Select
Save
, then select OK in the
Update Successful
message.
