Hologic R2 DM, User Manual

Page: 70 / 106

Part 5: Controls
5.1. About Option
The About option on the Controls screen displays information about the
configuration of your R2 film-scanning system on the network. This information is
configured by service personnel when the system is installed.
X
To display the About screen
Touch the
Controls
tab and then select
About
(if the About screen does not appear).
This screen provides some important data that you may need to provide to a Hologic
service support specialist:
•
Host IP address
•
Software version number
•
Instrument serial number
•
CAD algorithm operating points (The example above shows that operating point
[2] has been selected for both calcifications and masses.)
62 R2 DM User Manual – PN MAN-01044 Rev 001