Hologic MAN-07611 User Manual Download Page 10

Faxitron Path Table User Guide 

Chapter 2: General Information 

 

 

Page 6 

MAN-07611 Revision 002 

 

2.2  Safety Information 

Read and understand this manual before you use the table with the system. 

Keep the manual available during the operation of the unit. 
Always follow all the instructions in this manual. Hologic does not accept 

responsibility for injury or damage from incorrect system operation. Hologic can 

arrange for training at your site. 

2.3  Warnings and Precautions 

 

 

   

 

 

WARNING! 

The user must correct problems before the system is used. Contact 

an approved service representative for preventive maintenance. 

 

   

 

 

WARNING! 

The protection provided by the equipment is reduced if the 

equipment is used in a method not specified by Hologic. 

 

   

 

 

 

WARNING! 

No modification of this equipment is allowed. 

 

   

 

   

 

 

WARNING! 

Before adjusting the position of the table system, make sure the 

power cord and any cables are safely positioned out of the way.   

 

   

 

 

WARNING! 

To prevent fire or shock hazard, do not expose the table system to 

rain or moisture. 

 

   

 

   

 

Warning: 

The Faxitron Path Table is not designed to be mobile, but if it must be 

relocated make sure all four rubber feet are stored fully up, and the 

casters are supporting the weight.  Trying to move the system with the 

feet locked can cause the system to tip over.   

 

   

 

 

Warning: 

The Faxitron Path Table is not designed to be mobile, but if it must be 

relocated, rotate the Image Display monitor to a position that provides 

clear visibility while pushing the console. 

 

   

 

Summary of Contents for MAN-07611



















Reviews: