TKH / TKHP
3
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 060420.
PLEASE NOTE!
READ THIS MANUAL CAREFULLY BEFORE USING THIS
EQUIPMENT FOR THE FIRST TIME.
Foreword
This manual is intended to be a guide for correct use and maintenance of the equipment. Study the manual be-
fore starting up and operating or before any prevention maintenance is carried out.
Be confident with the equipment and all the instructions and keep the manual so it will always be used before
taking the equipment into operation.
OBS!
This manual is made to suit all our markets. There might be some differences and if this is the case for
you please do not take notice.
We are continuously working on improvements and we reserv the right to make design changes and
improvements without notice.
The operator is obliged to:
• Ensure that the implement is not used or handled in an incorrect manner.
• Look after ev. warning signs to be readable.
• See to that no unauthorized person uses the equipment or is within the operating area during work or
maintenance work
• Check that the carrier is appropriate to the attachment (hydraulic flow, stability etc.)
When ordering spare parts or by other contacts with Holms or your local dealer, always inform about the
attachment type and series No. This number you will find on the machine plate.
Please pay particular attention to the warning symbols.
WE SPECIFICALLY DO NOT ADVISE MAKING ANY MODIFICATIONS, CHANGES
AND CONVERSIONS THAT HAVE NOT BEEN SANCTIONED BY HOLMS.
WE ALSO WARN AGAINST USING SPARE PARTS THAT HAVE NOT BEEN
APPROVED BY HOLMS.
DAMAGE OR FAULTS THAT MAY HAVE BEEN CAUSED BY NON-APPROVED
SPARE PARTS OR NON-APPROVED MODIFICATIONS ARE NOT COVERED BY
HOLMS’ LIMITED GUARANTEE - SEE CURRENT GUARANTEE TERMS. HOLMS
WILL ALSO NOT COMPENSATE FOR ANY INJURIES TO PERSONS OR PROP-
ERTY THAT MAY HAVE BEEN CAUSED BY NON-APPROVED SPARE PARTS OR
MODIFICATIONS.
Summary of Contents for TKH
Page 2: ......
