Holms PD
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 131024.
15
5. For shorter transport journeys, use the tilt function to
lift the plough so it is easy to return quickly to the
correct plough setting.
6. NB! The loader arms must not be in the float position
when using Holms PD.
Setting Holms PD with parallelogram
attachment (plough with fixed stay)
1. Position the carrier for coupling with the machine.
2. Connect the lifting cylinder hydraulic hoses to the
carrier's hydraulic outlets.
3. Lift the machine attachment and connect it to the
carrier attachment.
4. Carefully lower the plough to the ground and ensure
that the runner is at a 90° angle to the ground. See
picture 7.
5. The ground pressure can be adjusted by shortening
(reduces ground pressure) or extending the rigging
screws (increases ground pressure).
Check before commissioning that the plough blade
does not touch the carrier's wheels in any position.
Check before commissioning that the plough blade
does not touch the carrier's wheels in any position.
Lifting or
lowering for
correct angle to
the ground.
7.Holms PD parallelogram
Higher ground pressure
Lower ground
pressure
90
°
Summary of Contents for PD
Page 2: ......
