1. Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the motor and heating elements.
2. After cleaning, be sure to completely dry the unit with a cloth or towel. After Season Care: 1. Store heater in a cool, dry location. 2. Holmes recommends
that you store the unit in its original carton. ACCUTEMPTM DIGITAL THERMOSTAT Your heater is equipped with an AccuTempTM Digital Thermostat
that allows you to set your heater to your precise comfort level. Setting the AccuTempTM thermostat: 1. Make sure the Manual/AccuTempTM switch is set to
AccuTempTM. The LCD display will read 25°.
2. Turn the mode control to LO, MED or HI. 3. Push the temperature set button until the display reads your desired temperature. To increase the temperature
push the top button, for lower temperatures push the lower button. When finished setting the temperature, release the button and the display will flash to
indicate the thermostat will be set to that temperature. 4. The display will return to existing room temperature and gradually increase until the room has
reached your pre-set temperature. 5. If the unit will not start in the AccuTempTM mode, please make sure the "set temperature" is higher than the current
room temperature.
NOTE: It is normal for the heater to cycle ON and OFF as it maintains the preset temperature. To prevent the unit from cycling, you need to raise the
thermostat setting. When the preset temperature is made, the fan will run for 30 seconds without heat. This cool down process ensures an accurate and
consistent temperature reading. If you unplug the heater, you will have to reset the AccuTempTM thermostat again by following the above instructions.
Manual Operation: 1. If you want the heater to run continuously, turn the Manual/AccuTempTM switch to Manual and adjust the mode control to LO, MED
or HI. TROUBLESHOOTING If your heater fails to operate: · Make sure the electrical outlet or circuit breaker is working. · Check for obstructions. If you
find an obstruction turn the heater OFF, and unplug the unit.
Carefully remove the obstruction and follow the reset instructions. · The thermostat might be set too low. Adjust the thermostat until the heater restarts. ·
Make sure selector is in LO, MED, or HI setting. If your heater fails to oscillate: · Make sure the oscillation button is pressed. Incorrect Room Temperature
Display: 1. Allow a few minutes for the heater to adjust to the room temperature. 2. Switch unit to Accutemp. Use touch pad to set desired temperature.
Please DO NOT attempt to open or repair the heater. Please see the Warranty for Service Instructions. ILLUSTRATIONS B H C A E D G Figure 1 A.
POWER LIGHT B. MODE CONTROL C. LCD DISPLAY SCREEN D. OSCILLATION SWITCH E. CARRY GRIP F. OSCILLATION BASE G.
TEMPERATURE SET BUTTON H.
MANUAL/ACCUTEMP SWITCH Figure 2 B C A G TM 25 HEAT CONTROLS OFF FAN LOW 500W MED 1000W HI 1500W F H D SERVICE
INSTRUCTIONS 1. Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the warranty. 2. If you need to
exchange the unit, please return it in its original carton, with a sales receipt, to the store you purchased it.
If you are returning the unit more than 30 days after the date of purchase, please see the enclosed warranty. 3. If you have any other questions or comments,
feel free to write us: Consumer Service Department The Holmes Group, Canada, Ltd. 6385 Shawson Drive Mississauga, Ontario Canada L5T 1S7 For your
own records, staple or attach your sales receipt to this manual. Also, please take a moment to write the store name/location and date purchased below.
STORE NAME: LOCATION: DATE PURCHASED: (STAPLE RECEIPT HERE) FIVE (5) YEAR LIMITED WARRANTY A. The quality controls used in the
manufacture of this Holmes product are to ensure your satisfaction. B. This Warranty applies only to the original purchaser of this product. C. This Warranty
applies ONLY to repair or replacement of any supplied or manufactured parts of this product that, upon inspection by Holmes authorized personnel, proves to
have failed in normal use due to defects in material or workmanship.
You're reading an excerpt. Click here to read official HOLMES
HFH595 user guide
http://somemanuals.com/dref/50921