background image

     Mould

: Mould stains should be cleaned as soon as possible. The

     stain should be washed with detergent, and if it does not
     disappear, it should be wiped with oxygenated water (in
     proportion of 3%).

     Ink:

 Hold the stained area under cold water and wait until the inky

     water completely runs off. Then rub with water diluted with lemon
     juice and detergent, wash after waiting for 5 minutes.

     Fruit:

 Stretch the stained area of your clothes on the top of a

     container and pour cold water on it. Do not pour hot water on the
     stain. Wipe with cold water and apply glycerine. Wait for 1-2 hours
     and rinse after wiping with a few drops of white vinegar.

     Grass stain:

 Rub the stained part with detergent. If the type of

     fabric is suitable for use of lye, wash it with lye. Rub your woolen
     clothes with alcohol.(For coloured ones, a mixture of 1 unit pure
     alcohol and 2 units of water).

     Oil Paint:

The stain should be eliminated before it dries by

     applying thinner on it. Then it should be rubbed with detergent and
     washed.

     Burnt stain:

 If your cloth is suitable for use of lye, you can add lye

     into your washing water. For woolen fabric, a cloth damped in
     oxygenated water should be covered on the stain and it should be
     ironed with a dry cloth on it. It should be washed after rinsing well.

SECTION 8: AVOIDING MINOR FAULTS

All repairing which must be done on the machine should be done by
authorized service. When a repairing is required for your machine or you are
unable to eliminate the failure with the help of the information given below:

  Unplug the machine.
  Close the water tap.
  Apply to the nearest authorized service station.

For Customer Services, Spare Parts & Warranty Information please call

0845 683 8717

 19

Summary of Contents for HWM51000





























Reviews: