Door reversal
6
You will need to tilt the fridge backward to access the lower hinge which holds screws. Do
not tilt more than 45 degrees and do not lay the fridge flat on its side.
For your own safety, a minimum of 2 people should lift or tilt this product.
Reversing the door:
Remove the upper hinge cover first.
Remove the two screws that hold the upper hinge (right side) to the fridge body. Remove
the upper hinge.
Lift the door and place it on a padded surface to prevent scratching.
Reverse the whole cover plate from the left side to the right.
Remove the two screws that hold the lower hinge and remove the lower hinge.
Remove the left front foot and transfer it to the right side.
Before fitting the lower hinge, swap over the hinge pin and the foot to the other side of the
lower hinge . Then install the lower hinge onto the left side of the lower frame with two
screws .
Position the door in place making sure the door seats onto the lower hinge.
Align the door in the closed position secure the upper hinge in the top fame on left side
with two screws. Remember do not tighten the two screws until the top of the door is
levelled with the top of the fridge.
Install the upper hinge cover on the upper hinge.
