5 of 8
Mounting the
Outdoor Sensor
We suggest the outdoor
sensor to be hung as
shown. It is best not to
stand it loose outdoors.
Avoid direct sun shine or
rain as much as possible.
Setup
Initial Operation
1. Open the battery compartment located on the
rear side of the devices. Place the batteries in the
battery compartment. Observe the shown polarity.
2.
Altitude
will be flashing. Use
+
and
–
to set the
altitude of your position. Press
HISTORY
to confirm
3. The weather symbol will now be flashing. Use
+
and
–
to choose the weather. Press
HISTORY
to confirm
4. Now
hPa
flashing. Use
+
and
–
to
choose between hPa and inHg
5. The
Indoor Display Console
is now connecting
to the
Outdoor Sensor
. This process takes
about 3 minutes, then the display shows the
outdoor temperature and humidity. In case
of failure of reception, press
CHANNEL
for
more than 3 seconds to receive again
Manual Time Setup
1. Press and
MODE
for 3 seconds
2. The display for Year is flashing. Use
+
and
–
to
select the current year. Press
MODE
to confirm
3. The display for Month is flashing. Use
+
and
–
to
select the current month. Press
MODE
to confirm
4. The display for Date is flashing. Use
+
and
–
to
select the current date. Press
MODE
to confirm
5. The display for 12/24hr time is flashing.
Use
+
and
–
to choose between 12 and
24hr time. Press
MODE
to confirm
6. The display for Hour is flashing. Use
+
and
–
to
select the current hour. Press
MODE
to confirm
7. The display for Minutes is flashing. Use
+
and
–
to
select the current minute. Press
MODE
to confirm
8.
COUNTRY/CITY
flashing. Use
+
and
–
to
select our location. Press
MODE
to confirm
The clock automatically changes from setup mode
to time display if nothing is pressed for 20 seconds
Daily Alarm Setup
1. Press
MODE
to switch from time
display to
A1
display
2. Press and hold
MODE
for 3 seconds. The
flashing alarm time will be shown
3. The hour display of the alarm time is
flashing. Use
+
and
–
to select the hour
needed. Press
MODE
to confirm
4. Follow on with the minutes. Use
+
and
–
to select
the minuted needed. Press
MODE
to confirm
5. Press
MODE
again to switch from
A1
to
A2
display,
then repeat steps 2-4 to set the
A2
alarm time
Daily Alarm ON/OFF
1. When showing
A1
alarm time, press
–
to
activate alarm
A1
with alarm symbol showing
2. Press
–
again to cancel the alarm
3. When showing
A2
alarm time, press
–
to
activate alarm
A2
with alarm symbol showing
4. Press
–
again to cancel the alarm
Alarm
A1
is for Monday to Friday
Alarm
A2
is for Saturday to Sunday
The alarm sounds for 2 minutes if
no key is pressed to stop it.
