PAGE 7
Before proceeding, ensure the spare watering planner
has been completed. From your planner you should be
aware which stations are allocated to each program.
Set one program at a time to ensure that the schedules
are completed correctly.
Example:
SET PROGRAM 1
Step 1. Set Start Times
Turn
the dial to
Set Start Times
and ensure that “Prog 1”
is flashing.
The display will show:
Press
next
and “Start 1” willl flash..
Press
next
and the “hour” will flash. Use
or
to
adjust. Note: Ensure AM / PM position is correct
Press
next
and the “minutes” will flash. Use
or
to
adjust, if required. Each program has up to four start
times and should you require a second start time,
Press
next
and “Start1” will flash. Advance to start 2 by
pressing
.
The display will show.
Press
next
and proceed as per setting
Start 1
.
Tip: To turn an active start time off, turn the dial to
the
Set
Start times
position,
Select
the start number required
using the
button and then
press
next
until the “hour”
is flashing. Use
or
until “OFF” is shown.
Tip: “OFF” position is between 12 and 1.
Programming
Programming
Set Current Time & Correct Day
Turn
the dial to
Set Clock/Calendar
position. The hour
will be flashing.
Use
or
to adjust. Note: AM / PM must be set correctly.
Press
the
next
button and the “minutes” will flash. Use
or
to adjust.
Press
next
and the “day of the week” will flash.
Use
or
to set correct day.
Set Calendar (Optional)
Note: The calendar only needs to be set when selecting
Odd/Even day watering in areas where water restrictions
may require this feature.
Press
back
button until the year, month and day are shown.
the “year” will be flashing.
Use
or
to adjust, if required.
Press
back
button and the “month” will flash.
Use
or
to adjust.
Press
back
and the “day” will flash.
Use
or
to adjust.
Tip
: To return to the clock,
press
next
, or
turn
dial to another position.
PAGE 6
