2
3
WELCOME TO HOLMAN iGARDENER
TM
Holman presents to you the Smart Control gardener range. We have an ever increasing range of
garden watering and irrigation control equipment that are controllable via your smartphone
in both iOS and Android formats.
iGardener
TM
watering control products allow you to use your smartphone to control
all the programming and interface functions on your tap timers or irrigation controllers.
Download the app at no cost and you will soon have total control of your garden watering.
Introduction
The Holman iGardener
TM
app allows you to control up to 8 controllers or tap timers. You are able to fully
control upto 6 zones on the BTX6. Each zone can be individually scheduled to suit the exact watering
schedule necessary for that zone.
Scheduling for each zone features 7 day watering, interval days, odd days and even days with the option
of setting your run time in hours and minutes with up to 3 start times per day.
The BTX6 also features cycle scheduling, which allows a run time and delay time. For example, you could
schedule a short burst of water to run for 1 minute every 20 minutes for 3 hours. The cycle feature is great
for the Holman GreenWall and for operating misting systems.
SIMPLE SETUP
Downloading the App
STEP 1
Download the app from
Google Play by searching
iGardener.
STEP 2
Install a 9V battery (located
under the terminal cover).
Ensure the controller dial is
pointed to
Connect & Run.*
STEP 3
Turn on your Bluetooth on
your smartphone and ensure
your controller is connected
to power.
SIMPLE SETUP
Downloading the App
3
Renaming your Controller
4
Unpairing the Controller
4
Manual Operation of the Controller
5
Manual Operation Via the App
5
Locking the Controller
5
Troubleshooting 6
Device Compatibility
6
BTX6 Features
6
OPERATING THE IRRIGATION APP
Key Functions
7
7 Day Watering Schedule
8
Interval Days Watering Schedule
8
Odd Days (-31) Watering Schedule
9
Even Days Watering Schedule
9
Cycle Watering Schedule
10
Syncing Start Times
10
Saving your Schedule
11
CONTROLLER INSTALLATION
Mounting the Controller
12
Electrical Hook-up
12
Field Wiring Connections
12
Power Supply Connections
12
Pump Start Relay Connection
(Water Supply by Pump System)
13
Single Phase Pump Installation
13
Master Valve Installation
(Water Supply Off Mains Water)
13
Zone Valve Installation
13
Pump Protection (System Test)
14
Servicing the Controller
14
Fault Finding Guide
15
WARRANTY 16
Contents
STEP 6
When your controller is found you
are ready to set up scheduling.
Select
Zone Management
to
begin the setup.
If you have
multiple controllers or tap timers
connected, the device highlighted
within the blue bar is the one you
are scheduling.
Ensure you check for iGardener app updates and keep the app up to date
with the latest version. Not updating your app will limit its functionality.
* The battery status is updated each minute. If you replace the battery it can take
up to one minute for the battery status to update accordingly.
STEP 4
On the iGardener app navigate
to
Irrigation.
To operate this app
you will need to allow access to
your device’s location when the
pop-up prompt appears.
STEP 5
Press the
+
button to add your
tap timer. Wait until your tap
timer is found. For security of
your watering schedule each
tap timer will only pair with one
smartphone.
