HOLMAN CONVEYOR TOASTERS
MODELS T710(H, TW, TX) T714(H, TW, TX) S710(H) S714(H) B710H
MAINTENANCE PROCEDURES
A. REPLACING HEATER TUBES (as below)
1. DISCONNECT UNIT FROM POWER SOURCE.
2. Remove right and left side panels.
3. Remove heater tube wire from terminal block connection, keeping
top and bottom wires separate.
4. Remove heater tube retainers by removing retaining screws with washer.
5.
Gently, pull defective heater tube out of unit.
6.
Gently, put new heater tube into unit.
7. Replace heater tube retainers, reconnect heater tube wires to terminal
block and install side panels.
HEATER TUBE
HEATER TUBE RETAINER
SIDE PANEL
HEATER TUBE TERMINAL BLOCK (4 POS.)
(2 POS. ON OPOSITE SIDE)
AIR INTAKE
HEATER TUBE RETAINER
Maintenance procedures continued on page 8
REVISED
9/10/2008
PAGE 8
OPERATOR'S MANUAL
