3 of 8
Installation
Your
Retractable Hose Reel
should be installed nearest
to your chosen water source for convenience of use.
1. Check the
TAP-TO-REEL HOSE
can reach your
tap prior to installing the
WALL BRACKET
2. Take the
WALL BRACKET
and place it
against either a wall or wooden post
3. Mark inside the centre of each of the
bracket holes to prepare for drilling
»
If you are attaching your
Hose Reel
to a wooden
post, you will not require the
WALL PLUGS
as the
COACH BOLTS
can screw directly into wood.
4. Use the table below to select the correct
drill bit for your
Hose Reel
»
If using plugs that were not included with your
Hose Reel
, drill slightly undersize as masonry
materials all have different properties which
will ensure the wall plugs have a secure fit.
It is very important to use the correct size drill bit,
so a very secure fit of the wall bracket is made
before installing the
Retractable Hose Reel
.
5. When ready, drill all four holes, then
hammer the
WALL PLUGS
gently into
your wall (if attaching to a wall)
1110H 10m
1120H 20m
1130H 30m
PLUG
7.7mm
11.7mm
11.7mm
MASONRY DRILL
7.5mm
11.5mm
11.5mm
WOOD DRILL
5.0mm
7.0mm
7.0mm
BOLT
6.0mm
8.0mm
8.0mm
MAX 1m (1110H)
MAX 2m
(1120H/1130H)
d
c
