876-347
E.T.T. Electronic Toys Trading GmbH Kreuzstraße 65/66 38118 Braunschweig
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
18.
PITCH BEND +: Accelerates the pitch up to 16 % when the button is pressed. If you let the button go it
returns to the original pitch.
19.
PITCH: Activates or deactivates the PITCH CONTROL function [4].
20.
FLD/TRK SEARCH: Addressing tracks or folder.
21.
DSP/REVERSE: Digital signal processor. For playback tracks in reverse press here. For cancelling this
function press this button again.
22.
DSP/BRAKE: Digital signal processor. For slowly going from playback mode into pause mode press first
here and then
/
[2]. For cancelling this function press
/
[2] again.
23.
SCRATCH: On-/Off-switch for the jog-wheel-function SCRATCH. The LED flashes when it is active.
24.
SEARCH: Toggle for the jog-wheel-functions PITCH BEND (LED off) or SEARCH (LED on).
25.
CD: LED as indicator of the CD-mode.
26.
SD: LED as indicator of the SD-card-mode.
27.
USB: LED as indicator of USB-mode.
28.
HEADPHONE: 6.35 mm TRS-connector for headphones.
29.
CD: CD-drive.
30.
SD: SD-card slot.
Rear:
1.
AC IN ~: Connector for the power supply cable.
2.
ON/OFF: On-/Off-switch.
3.
GND: Grounding connector for a turntable.
4.
INPUT PHONO/LINE IN: Switch for a turntable or a Line-In-device as signal source.
5.
INPUT LINE: Cinch connectors for a signal source.
6.
DJ MIC: XLR-connector for a microphone.
7.
MIC: 6.35 mm TRS-connector for a microphone.
8.
OUTPUT: Signal output to an external amplifier or mixer (AMP) or a recording device (REC).
