Hollywood Racks HR4000 Assembly And Instruction Manual Download Page 5 | Manualshive

Page: 5 / 8

Hollywood Racks HR4000 Assembly And Instruction Manual Download Page 5

First Bike Installation
Tip: rotate pedals so that
right (or chain ring side)
is forward.

Mounting and securing the first
bike: Place the bike (handlebars on
driver side) onto the inner most
wheel tray per Fig. 17. Rotate the
frame ratchet strap (Fig. 18) so that
it aligns with the bike’s frame.
Insert the strap into the top of the
buckle and pull the strap tight per
Fig. 19.

Attach the wheel ratchet straps to the bike’s wheels per Fig. 20. Note
position of strap and wheel. If you need to relocate the wheel strap to the
outer hole position, please refer to Fig. 14 on page 4. Note Fig. 21 for
correct position of buckle and ratchet teeth.

5

Fig. 21

Mounting and securing the second
bike: Fold the outer mast down.
Place the bike onto the wheel trays
(handlebars on passenger side) per
Fig, 23.

Rotate the frame ratchet strap (Fig. 18) so that it aligns with the
bike’s frame. Insert the strap into the top of the buckle and pull
the strap tight per Fig. 19.

Attach the wheel ratchet straps to the bike’s wheels per Fig. 20.
Note position of strap and wheel. If you need to relocate the wheel
strap to the outer hole position, please refer to Fig. 13 and 14.
Note Fig. 21 for correct position of buckle and ratchet teeth.

Second Bike Installation tip:
Rotate pedals so that the
right pedal is up.

Fig. 17

Fig. 18

Fig. 19

Fig. 20

Fig. 23

Fig. 22

NOT OK

«
...
3
4
5
6
7
...
»

Summary of Contents for HR4000









Reviews:

No comments