Insert the bike rack’s hitch tube into the vehicle’s trailer hitch
receiver. Align the holes of the hitch tube with the receiver. Place
split washer
K
then the flat washer
J
onto hitch pin
M
per Fig. 6.
Thread the hitch pin through the receiver and into the hitch tube
using the tool provided. Alternatively, use a 3/4” or 19mm
socket. Tighten securely. Place the lock onto the hitch pin’s end,
then lock it by turning the key per Fig. 7. Alternatively, the R
shaped clip
L
can be installed through the hole in the hitch pin per
Fig. 8.
Step 2: Installing
rack into 1 1/4
”
or
2”
trailer hitch hitch
3
Fig. 7
Fig. 8
Fig. 6
Use with 1 ¼” hitches:
If the rack is to be used on a
1 ¼” hitch, remove the aluminum spacer
block from the receiver tube with the
included socket wrench (item P) per Fig. 9.
Insert and tighten per above instructions.
Fig. 9
