Hollymatic 28, Operator'S Manual, Page: 8 / 19

5
5 Good using

Do not lay down the machine

Work the paste to a minimum temperature of 10°C.

BEFORE each using, remove the piston to lubricate the
joint.

BEFORE each use, the piston in the down position, oil the
cylidner pfor a proper funcitoning of the joint.

Oil seal cover

Tighten the two bolts of closing the lid

When lowering the piston, the peddle locks in the down
position so the operator does not need to keep his knee on
it.
However, the operator must manually move the
peddle to the neutral (center) position when the piston
has reached the bottom of the cylinder.
CAUTION!
Failure to do so will cause the motor to
continually run causing the motor to overheat and
possibly burn up.