6
3. Operation instruction
■
Getting started
After finishing all steps above, system is workable, follow below
steps please.
a)
Ensure the video source and the display terminals are power on.
b)
Ensure all input, output cables are connected.
c)
Insert DC IN power adapter into AC plug base, then place power
switch to “ON”.
d)
It takes about 2~3 seconds to finish EDID and other initialization
automatically.
e)
When input video source is locked, splitter ‘POWER/ VIDEO I
IN’ indicator will light, it means input video signal is OK, if
HDMI input is unlock, the light will be just flicking.
f)
At this time, display terminals will show the same format video
that video source send out. And relative connected ‘HDMI OUT’
ports indicators will light; it means video outputs are OK.
■
Internal EDID function
This splitter has internal EDID function, support 8 display terminals
EDID signal dynamic combination. This function is automatic, no need to
setup by customers. This function is to keep maximum compatibility.