Page 3
Daws 3pc Wall Mirror Set
Assembly Instructions
REQUIRED WHEN MOUNTING TO WOOD WALL USE SCREW ONLY. WE
DO NOT SUPPLY HARDWARE FOR MOUNTING ON CONCRETE WALLS.
Figure 1
Find a desired location and mark
three locations for screws on wall.
All screws (1) must be attached
directly into a wall stud.
Using the Phillips head screwdriver,
install screws (1) into the wall. Turn
the screws (1) until there is a gap of
approximately 3mm between the
head of the screw and the wall.
Figure 2
Hang large mirror (A), middle mirror
(B), and small mirror(C) onto the
screws (1) and verify the brackets are
resting securely on the mounting
screws (2).
