3
Whoso 3pc Mirrored Wall Sculpture
Assembly Instructions
Note: Drilled hole or plastic anchor not required when
mounting to stud, use screw only. We do not supply hardware
for mounting on concrete walls.
Check that you have all parts indicated
on the front page.
Find a desired location. Mark
3
location for screws on wall.
Drill one 3/16" hole (for each unit).
Insert plastic anchor (A) into the hole
on wall. Tap lightly with Hammer (not
included) as needed.
Using the Phillips screwdriver, install
Screws (B) into the Anchors (A) and
any remaining marked holes.
Turn the Screws (B) until there is a
gap of approximately 1/8" between the
head of the screw and the wall.
Mount the Whoso 3pc Mirrored Wall
Sculpture (1) onto the Screws (B) and
verify the Whoso 3pc Mirrored Wall
Sculpture is resting securely.
Now your Whoso 3pc Mirrored Wall
Sculpture is ready to use.
Page 3
