Figure 1
Step 1
Unpack and lay parts on clean,
padded surface like carpet or
blanket. Check that you have all
parts indicated on the front page.
Step 2
Insert glass support (F) into the
base frame’s (A) pre-drilled holes
as shown in Figure 1.
Step 3
Then place the glass top (D) on
the inside top frame as shown.
Figure 2
Step 4
Insert glass support (F) into the
base frame’s (B) pre-drilled holes
as shown in Figure 2.
Step 5
Then place the Mirror top (E) on
the inside top frame as shown.
3PC OCELLE NESTING TABLE SET
Assembly Instructions
Page 3
