HO976100TX Hagio Desk
Assembly Instructions
FFFFigure 1
igure 1
igure 1
igure 1
Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check
that you have all parts
indicated on the front page
Insert cam locks (4) into
predrilled holes on top rail (C).
Screw cam bolt (5) into
pre-drilled holes
on
leg (B).
Attach top rail(C) to
leg
(B) by
inserting cam bolt (5) into
corresponding pre-drilled holes
until leg (B)
&
top rail (C) meet.
Tighten by rotating cam lock (4)
clockwise with Phillips
screwdriver.
Attach PVC cover (9) on the
cam-locks holes as shown.
FFFFigure 2
igure 2
igure 2
igure 2
Insert T-nut (3) into predrilled
holes on
leg (B)
Attach bottom rail (D) to
pre-assembled unit on figure 1
by inserting wood dowel (7) &
long bolt (1) into predrilled holes
until pre-assembled parts in
figure 1 & bottom rail (D)
meet.
Tighten with Allen wrench (6)
Then attach PVC cover
(9)
on the T-nut holes as shown.
( 2)
( 1)
"Please do not over tighten cambolts. Please stop
when you feel tight"
B
