hollu OM 143, Use And Maintenance

Page: 29 / 48

ENGLISH - 7
6.1.c - Using the machine
(Fig. 17)
- After starting the machine, begin cleaning
by keeping the levers (29) pressed, thus
keeping the machine running and brush
rotation active.
DANGER:
During operation, avoid passing over the
power cable with the machine: this could
cause serious damage and dangerous
situations!
WARNING:
Using the machine in a fixed position with
the pad rotation enabled for a prolonged
period of time can cause damage to the
floor.
NOTE:
When the levers (29) are released, pad rotation
stops and the machine turns off
6.1.d – End of use and shutdown
(Fig. 17-20-21).
- Release the levers (29) to stop pad rota-
tion and turn off the machine (Fig. 17).
- Put the handle in an upright position.
- Remove the tank (Optional), empty the
solution and clean the nozzle as indicat-
ed in the maintenance paragraph.
- Unplug the power cable from the socket
and wrap it around the cable reel sup-
ports.
- Roll up the cable on the supports (11)
(12) (Fig. 20).
- To remove the cable from the supports,
turn the hooks (11) (12) inward and re-
move the cable without necessarily un-
winding it (Fig. 20).
WARNING:
Do not leave the machine stopped with
the fitted pad or driving disc resting on
the floor, to prevent them from being
damaged.
Place a support (21) underneath and in
the centre of the disc, to raise the pad or
dragging disc off the floor (Fig. 21).
6.1.e - Transport (Fig.22)
Making sure that the mains plug is discon-
nected and the handle is in an upright posi-
tion, lift the machine body by turning the han-
dle downwards.
The machine can then be transported on the
wheels.
If it is necessary to lift the machine for load-
ing on trucks or for climbing stairs, proceed
as follows:
- Two persons must raise the machine:
one on the guide handle (27) and the
other through the handle (7).
7.1 MAINTENANCE AND
CLEANING
WARNING:
For information and warnings relating
to maintenance or cleaning, follow what
is described in the “Safety warnings for
single disc” manual, accompanying this
document.
Manuale HU30-933_HOLLU_OM143_3l_1ed_07-2019.indd 7 16/07/2019 08:38:05