199R-9527
Date: 2-2-04
Page 1: ...ributor then label that line In the event that any components are strange or unknown use a numbering system that corresponds each line to its component 1 Label and disconnect all vacuum hoses and electrical lines from the original carburetor Disconnect the fuel line and retain the clamp WARNING Carefully protect the open end of the fuel line so that no foreign particles can enter Wrap the end of t...
Page 2: ... or vacuum leaks STARTING INSTRUCTIONS Rough Idle and Vacuum Leaks If rough idle exists after the engine has been fully warmed up check for vacuum leaks Vacuum leaks can result from unplugged vacuum fittings torn or improperly installed flange gasket improper torque on the carburetor throttle body to manifold hold down nuts or through improper reconnection of the vacuum lines ALL CARBURETOR TUBES ...
Page 3: ...199R 9527 Date 2 2 04 ...
