User Manual
14
Version 1.0
V. Installation and Operation
5.1 Operation environment requirement
•
Do not expose the pump to wet conditions (such as rain or steam). Moisture may cause the
power connector to malfunction.
•
Do not expose the pump to flammable or explosive gases.
•
The pump should be operated in a temperature controlled environment from ° 5 C to 40 ° C.
If operated outside this temperature range, the pump may be damaged.
•
The pump should not be used in a dusty environment or near corrosive gases. Operating in
such environments will reduce the lifespan of the pump.
•
There should be adequate ventilation for the pump.
5.2 Electrical Connection
The Anemos vacuum pump uses a single-phase power. Wiring method is shown below.
Connect the power line to the power connector on the pump. Turn on the power switch (“1” is
pressed and “0” is in the raised state) and the pump is ready to run.
